Pioneers, Trackers, Roadracers and Heros — Part Two

Perhaps the single, most emblematic form of American Motorcycle Racing is Flat Track racing. Although the earliest races are literally lost in the mists of time, it doesn’t take a lot of imagination to visualize your great grandpa and my great grandpa — yours had his new Harley Davidson and mine his new Indian. — out at their local county fairgrounds on sunny Saturday afternoon. Riders being riders, they were checking out each others rides, maybe talking a little trash, and then looking at the horse racing track out behind them, looking at each other, and then getting a real funny look on their faces.

“So let’s go, eh?”

What may have started out as a spontaneous run-whut-ya-brung night at the fairgrounds quickly turned into national competitions that consumed the engineering energies of the Harley and Indian factories and riveted the attention of the nation. And like all proper arms races, it quickly went nuclear when competition moved from horse racing ovals to the banked wooden bicycle racing velodromes. The banked wooden surfaces made slowing down for corners completely unnecessary. And since big is good, huge must be better, so the quarter-mile velodomes were quickly replaced by purpose-built half mile, full mile and even two-mile highly banked motordromes.

Board-track racing was crazy fast, with average speeds over 100 mph becoming commonplace. Board track racing was exciting — racing was close, with bar to bar action in the corners the order of the day.

Unfortunately, falling on a board-track was also deadly. Splintered surfaces and hard fences at the outside of the tracks meant a get off had a fatality level that added up to a sustained and unacceptable level of outright carnage.

So, facing an onslaught of negative press that grew to overwhelming public outrage, motorcycle racing moved back to the dirt. Racing in the dirt was slower, perhaps better racing, and when people fell off, and they are wont to do, way less of them died doing it. And so flat track became Americas foundational motorcycle sport — with trackers barnstorming across the country — to places like Springfield, Peoria, Laconia, San Jose, Ascot and Lodi and a million other fairgrounds and small towns across this great country.

Heck, even Frederick Maryland, near my home of Jefferson, has the Barbara Fritchie Classic , the longest continually running Half Mile, having first been run on the Oval at The Great Frederick Fairgrounds in 1922.

AMA’s involvement with Flat Track Racing was foundational, deep and total. AMA did promotion, sanctioning and management of the racing series until 2008, when they sold their interests in this series — and others, such as Superbike, Motocross and ATV Racing — to the investment group that runs Daytona Speedway and NASCAR. The notion was to turn the business of Professional Racing over to the Pros, and return the AMA to its advocacy and amateur sponsorship roots.

But as a result of this intimate relationship between the AMA and Flat Track Racing, means that AMA has more keystone Flat Track racing motorcycles than anyone, not to mention racing leathers, boots, helmets, trophies and other ephemera that really give you a full 360 view of the sport and its finest practitioners.

 

***

 

There’s really no better place to start that view than with Joe Leonard and his Harley Davidson KR750. Joe is a red-blooded American’s answer to Big John Surtees — our only homegrown Champion at the highest levels of both two and four-wheeled motorsport. Strangely and somewhat irritatingly to two-wheeled enthusiasts, so successful was Joe as an Indy Car driver, that many fans weren’t aware of just how talented and successful a motorcycle racer Joe Leonard was. Successful to the tune of Three Time Winner of AMA’s Grand National Championship — in 1954, 1956 and 1957. Successful, despite having vision so poor (and so uncorrected) that Joe resoundingly flunked the vision test when he submitted to USAC’s physical to obtain his Indy car racing license.

His rival and eventual teammate Mario Andretti was reported to have ridden Joe afterwards – “Jose, can you see?”

Joe, ever the light-hearted soul, had come back with something to the effect that “As long as everybody was behind me, it didn’t matter.”

Successful, despite having raced on a machine that was the technological equivalent of a Stone Axe — the Harley Davidson KR750. The KR 750 was perhaps Harley’s first, furtive steps in the direction of internal combustion modernity — and they were baby steps, at that. First conceived in 1950 as a response to the first waves of British and European twins being imported into the US, the KR was designed to be lighter, more modern motorcycle that could be purchased at any dealership and raced by anyone who had purchased one. To this end, the Street model KR had hydraulic forks, a rear swingarm and twin shocks, Harley’s first unit construction engine, and a four speed transmission mated to a hand-operated clutch. That was a far as modernity went, though. In the engine bay the story was still more Briggs and Stratton meets the Age of Steam.

The KR’s motor was still a cast iron cylindered, side-valved flathead. It made up for lack of breathing and rpm potential with extra displacement and tremendous torque at lower engine speeds. The KR was easy to work on, and robustly built — things tended not to break. The race versions of the KR – in the interest of weight – dispensed with the rear suspensions, and had rigid frames. With a fairing, the KR was a surprisingly good roadracer. On the dirt track, they were simply dominant.

With a little help from their friends at the Sanctioning Department of the AMA, who set the racing class rules so that 750cc sidevalves competed against Overhead Valve engines of not more than 500ccs, Harley’s humble Everyman Racer began a 15 year rip of being the most successful racebike in America. Joe used to relate how his mechanics would gripe — because Joe was not a small guy — how “they were giving up 8 horsepower” because of his size. Joe, accordingly, became somewhat maniacal in trying to get as much of it back as possible by drilling as many holes in his motorcycles as physics would allow — take a good look at the engine cases of his KR.

 

Iron Barrels, Flatheads and An Awful Lot of Holes

 

Under the wrist of Joe Leonard – who was inducted into the Hall of Fame in 1998 – if you were racing in the Grand National Series between 1954 and 1961 — it was a bike that was winning everywhere.

More amazingly, the KR didn’t stop winning when Joe Leonard made the jump to Indy Eagles. For an engine that shared its architecture with your lawnmower, the KR just kept hooking up on corner exits and winning for nearly a generation.

 

Might Have an Engine Like Your Lawnmower, But It’s Still In Front of You, Pal

 

Mert Lawill was no slouch of a rider, either. He too, could win a Grand National Championship — on this bike in 1969 — given a lawnmower to ride. Of course, since Mert was no slouch as a designer, or fabricator, either, his KR was developed to its absolute limits. Mert was enough of an engineering minded development rider that his racing KR had been modified to include a dual shock swingarm rear. His personal touches abound – the shape of the fuel tank and tail section are unique to Mert’s racer, the engine mounting plates and swingarm fabrication are all art in metal.

When Mert – who was also inducted to the Hall in 1998 – stopped racing motorcycles, he kept right on outdoing himself, first designing and building the archetype of the full suspension mountainbike. After revolutionizing mountainbike design, Mert adapted its parallelogram rear suspension to a custom short production run motorcycle called the Lawill Street Tracker. The machine work on the Tracker — from the swingarm, to the drive pulley, to an oil tank that masquerades as a racing number plate — is pure jewelry. If one was going to buy any of the Harley based XR replicas that the market provides — the Lawill is clearly the one to have. More recently, Mert has been designing and fabricating prosthetic limbs for motorsports enthusiasts and for the Walter Reed Army Medical Center.

Every bit of it is immediately obvious as artwork in metal.

 

***

 

Even something as simple as your lawnmower will eventually fail, and by 1969 — a motorcycle that some characterized as obsolete when it was introduced in 1954 — the KR was well and truly finished as a competitive racing motorcycle.

It’s not like it was a smooth transition.

AMA decided to level the field by eliminating the equivalency formula that had allowed the flatheads to survive. With all racing motorcycles now allowed 750 ccs, regardless of valve configuration or operation, Harley had to make more power, and now, or racing was going to become known by its new name of losing a lot. They needed overhead valves, and they needed more revs to make power competitive to that of the Trumphs and the BSAs.

Harley, being Harley, did what they had always done — they looked around to see what they already had that could be adapted to task. The problem with the KR wasn’t really the frame, or even the running gear — the setup on Mert’s KR, with Ceriani forks and his swingarm transplant — wasn’t bad, so they kept it, and went looking for a motor.

HD had a motor — the 1000cc plant from the XR series Sportsters. So the racing department fabbed some shorter connecting rods, sleeved the cylinders down to get the motor down to the required 750cc, and used the Sportster’s cast iron cylinders and heads.

When Racers nickname your new racebike “The Waffle Iron”, it probably isn’t intended to be complimentary, and it wasn’t. The first few years of iron headed XR racebikes — making RPM and making power — which was new for them — overheated, seized and blew up with startling regularity.

The XR was initially so unreliable, that Mert — HD’s Factory Top Gun — who was defending his 1969 Grand National Championship, was forced to fire his Iron Head XR and put his supposedly retired KR back into the game.

You May Have Trouble Catching These

XR Version Two Point Oh — which went to a still shorter stroke and, more importantly, all aluminum cylinders and heads, figured out how to use thermal energy to make forward motion, instead of the prior explosions. It took a couple of years to get the bugs out, but once the ‘Motor Raid’ had done its little extermination thing, the XR750 went on to all but own – with one brief exception – Flat Track Competition though 2015.

Just Fuggedddaboutit

Another XR, another Number 1 Plate

Not all XRs spent their time sliding sideways in the dirt — some of them took up flying. Evil Knievel’s XR was basically a stock tracker save a front brake and footpegs that had been widened slightly to provide a little more leverage for body english while the bike was airborne.

Evel Jumpbike Replica

Why do you think Evel needed these?

 

***

 

Owning the dirt for decades didn’t mean a few folks didn’t take a run at Harley-Davidson. Honda, in particular proved that willingness to invest and do a little R&D meant that you could beat them, too, even if rules changes meant you might not be able to make it stick for very long.

Honda was confident that if they had their own V-twin flattracker, they could win with it. Like Harley, they looked around to see if they had one available, and their available choice was, well, a little weird. The only V-twin Honda had to work with was the CX500, which, it must be observed, was designed to be installed in a transverse orientation, and whose appearance has been compared favorably with that of an industrial water pump. On the positive side, though, the engine was water-cooled, had 4-valve heads, and did have an entirely deserved reputation for indestructibility — even bored out to 650 cc and turbocharged the CX just laughed it off.

Your CX 500 Don’t Look Like This

Honda had to slice up a lot of metal to make their tracker — the transverse motor was rotated 90 degrees to bring it in-line, and cases and transmission were reworked to replace the street bike’s shaft with a chain. Intake runners needed to be changed so that carburetors didn’t end up in spaces unfortunately required for important parts of the rider.

The engine had one more surprise — designed as a low to midrange rpm powerplant, its cooling system was intolerant of extended high rpm operation — the waterpump would cavitate, and the resulting air bubbles in the water jackets would spot boil, and power from the engine would plummet, usually at the times one needed it most.

Honda was absolutely right that if they had their own V-twin flattracker, they could win with it. The NS750 just wasn’t that motorcycle.

The Honda men internalized one of the essential wisdoms of racing — “Don’t get mad, get even.” — and went back to the well to design the RS750.

The RS turned out to be everything the NS was not. But most importantly, with a guy named Bubba Shobert at the bars, it was a winner – blowing 3 straight Grand National Championships in 1985, 86 and 87. The RS was so dominant that it attracted the unwanted attentions of rule makers, who mandated restrictor plates and ballast to keep the Grand National Championship from turning into a boring Honda RS parade.

To see flat track dominance like that, you’d need to fast forward to 2016, to when Indian Motorcycle decided that the route to their future led through the past — the days of the 1920s Indian Wrecking Crew at the intersection of the Motordromes and the return to the dirt. Indian decided to build a bike to go back to the oval, and to win.

Take a Good Look, Because You’ll Only Be Seeing The Back of this Bike From Now On

The way back started with this prototype unit for Indian’s FTR 750 — 3d printed parts and all. The eventual product has been dominant — basically running all the podium positions in every race of the 2017 season, and winning team rider Jared Mees the Grand National Championship. 2018, so far, doesn’t look to be any different.

Indian is hoping — 98 years after Shrimp Burns helped Indian dealers sell bikes to peformance-minded riders — that at least some things never do change.

 

 

Part Three can be found here.

Advertisements